FREE SHIPPING for orders over $500.00
SKU 117-4467 Categories ,

RETRACTABLE 3 BOLT HOLE LAP/SASH SEAT BELT AT 90º SEEN ON PILLAR WITH 165MM RIGID BUCKLE

RETRACTABLE 3 BOLT HOLE LAP/SASH SEAT BELT AT 90º SEEN ON PILLAR WITH 165MM RIGID BUCKLE (BENT AVAILABLE ON REQUEST)

$217.80

RETRACTABLE 3 BOLT HOLE LAP/SASH SEAT BELT AT 90º SEEN ON PILLAR WITH 165MM RIGID BUCKLE (BENT AVAILABLE ON REQUEST)

 

BELT LENGTHS ARE **SHORT 2750mm,  **STD 3150MM,  **LARGE 3450mm,  **XLARGE 3950mm

Select the option you need or Contact us for a custom size

NOTE:When selecting Large and XLarge belts please be aware that the longer the belt, the higher the shoulder point needs to be in your vehicle

  • 3450mm belts the shoulder point must be at least 1050mm above the retractor
  • 3950mm belts the shoulder point must be at least 1280mm above the retractor

If a seat belt is too long for the bolt points/distances in your vehicle then the excess webbing will firstly jam up the reel and then will not fully retract the belt because the reel is over full. This can also render the seat belt inoperable because of the reel jamming up with the excess seat belt webbing

*All mounting bolts, washers and spacers required are included.

*Anchor plates are optional and need to be purchased separately

NOTE: This product cannot be fitted in a front seating position where an airbag is optioned in that position

 

Coloured  webbing other than black, dark grey and light grey may be considered a special order and we only have some of the more popular colours available for immediate dispatch.

Please Contact Us should you wish to discuss your custom colour requirements before placing your order.

We do not track stock levels on our website and when you place your order it may be in or out of stock. If in stock your order will be dispatched and delivered within 1-5 working days depending on your location. If your item is out of stock, we will contact you via email or phone advising you of this with an estimated delivery time.

Suppliers and manufacturers can also run out of stock or have large orders to fulfil and sometimes this causes unexpected further delays.

Please Contact Us if you wish to discuss current stock levels and expected shipping times should you require your delivery to be within a certain timeframe.

Weight 1.5 kg
Belt Length

, , ,

Colour

, , , , , , , , , , , , , , , , ,

Bolt Size

7/16" UNF (STD), 1/2" UNC

This product is compatible with the following vehicles

Make Model Year Seat Position
Make Model Year Seat Position
MITSUBISHI DEBONAIR S22A (SEDAN) 1992 Left Rear
MITSUBISHI DEBONAIR S22A (SEDAN) 1992 Right Rear
MITSUBISHI DEBONAIR S27A (SEDAN) 1992 Left Rear
MITSUBISHI DEBONAIR S27A (SEDAN) 1992 Right Rear
TOYOTA CROWN MS65R (SEDAN) 1980 Front Driver
TOYOTA CROWN MS65R (SEDAN) 1980 Front Passenger
TOYOTA HILUX RZN147R (UTE + WORKMATE) (3 PASS) (NO AIRBAGS) 1997-2005 Front Driver
TOYOTA HILUX RZN174R (UTE + EXTRA CAB) (3 PASS) 1998-2002 Front Driver