FREE SHIPPING for orders over $500.00
SKU 790-001 Categories ,

SEAT BELT 90/90 ON PILLAR GP END

SEAT BELT 90/90 OP THIS IS THE RETRACTOR ASSEMBLY ONLY ON PILLAR TWO MOUNTING POINT

$163.90$168.90

SEAT BELT 90/90 OP THIS IS THE RETRACTOR ASSEMBLY ONLY ON PILLAR TWO MOUNTING POINT

REQUIRES 2 BOLT POINTS ON THE PILLAR SIDE. MOUNTS AT 90º ON PILLAR

NOTE: THIS BELT TONGUE HALF IS ONLY WITH NO BUCKLE/STALK

(ONLY COMPATIBLE WITH AUSTRALIAN MADE BUCKLES SUCH AS HEMCO, APV, KLIPPAN & AUTOLIV AUSTRALIA)

 

BELT LENGTHS ARE **SHORT 2775mm,  **STD 3225MM,  **LARGE 3725mm,  **XLARGE 4225mm

Select the option you need or Contact us for a custom size

NOTE: When selecting Large and XLarge belts please be aware that the longer the belt, the higher the shoulder point needs to be in your vehicle

  • 3725mm belts the shoulder point must be at least 1110mm above the retractor
  • 4225mm belts the shoulder point must be at least 1360mm above the retractor

If a seat belt is too long for the bolt points/distances in your vehicle then the excess webbing will firstly jam up the reel and then will not fully retract the belt because the reel is over full. This can also render the seat belt inoperable because of the reel jamming up with the excess seat belt webbing

NOTE: When used in conjuction with a bench seat please ensure that you have a minimum of 75mm of room beside the seat to mount the retractor down the bottom of the pillar.

*All mounting bolts, washers and spacers required are included.

*Anchor plates are optional and need to be purchased separately

NOTE: This product cannot be fitted in a front seating position where an airbag is option in the position

Direct Replacement for

Autoliv Australia 511085601A

KLIPPAN 511164121A

APV 511708301

Hemco 1790001

Hemco 1790006

Hemco 1790099 (Contact us if you have this belt)

Coloured  webbing other than black, dark grey and light grey may be considered a special order and we only have some of the more popular colours available for immediate dispatch.

Please Contact Us should you wish to discuss your custom colour requirements before placing your order.

We do not track stock levels on our website and when you place your order it may be in or out of stock. If in stock your order will be dispatched and delivered within 1-5 working days depending on your location. If your item is out of stock, we will contact you via email or phone advising you of this with an estimated delivery time.

Suppliers and manufacturers can also run out of stock or have large orders to fulfil and sometimes this causes unexpected further delays.

Please Contact Us if you wish to discuss current stock levels and expected shipping times should you require your delivery to be within a certain timeframe.

Weight 1 kg
Belt Length

, , ,

Colour

, , , , , , , , , , , , , , , , ,

Bolt Size

7/16" UNF (STD), 1/2" UNC